867 Church St New Bedford, MA 02745 Sales: 855-772-5747

Click above to read our reviews or to leave a review


Stop Rust

We offer two distinctive products and are authorized installers for both Fluid Film and ValuGard!

Call 855-772-5747

Fluid Film starting at $149

An annual treatment product that stops rust in its tracks!

ValuGard starting at $499

A one time application that lasts the life of your car! ValuGard is a black asphalt base undercoat.

Fluid Film FAQ

Fluid Film® will not harm paint. It can be sprayed directly on painted surfaces without any harmful effects.

No, Fluid Film® has no adverse effects on plastics or synthetic rubber. On 100% natural rubber, some swelling can occur.

Because Fluid Film® leaves a wet, non-drying film and imbeds itself in the pores of the metal, any surface treated with Fluid Film® should be wiped down with a good biodegradable cleaner before painting.

Fluid Film® is not formulated to remove rust. However, if applied over existing rust, it will stop it immediately from spreading further. Fluid Film® will penetrate rust and rust scale to the base metal, loosening and easing in the removal process.

Fluid Film® is an excellent way to protect battery terminals. Because Fluid Film® is non-conductive, make your connections before applying. The non-drying characteristics of Fluid Film® will provide long term protection in this application.

Because Fluid Film® remains wet, it will get an initial dusting upon application, but because it contains no solvents and will not become sticky, it will not gum up or create a build up of dirt.

No, Fluid Film® is not biodegradable.

No. Fluid Film® is non-conductive and will not harm electrical connections. Make sure that all connections are made before applying Fluid Film®.

Fluid Film® works very well in locks. Fluid Film® will provide long term lubrication in a lock assembly. In cold weather applications, Fluid Film® will keep locks from freezing, and since Fluid Film® contains no solvent, it will not get gummy or create a build-up of dirt. Do not over-apply; a light application is all that is necessary.

Fluid Film® is an excellent leather conditioner, and will soften and weather proof leather work boots.

Fluid Film® will prevent snow from sticking to snow blowers, snow shovels, snow mobiles, etc. and will also keep locks from freezing. It works in sub-zero weather conditions. Application may be required before each use.

Fluid Film® is an all purpose chain lube due to its non-solvent application. Spray Fluid Film® directly on the chain, wiping off excess with a clean rag. Fluid Film® will migrate into all areas, providing long-lasting lubrication and protection from rust. Great on bicycle chains as well.

Yes. Apply Fluid Film® to a clean dry rag, rubbing into metal surface as would be done with a polish or a wax. Will not leave fingerprints or affect bluing. The lanolin base of Fluid Film® will also act as a conditioner on wood stock. Fluid Film® will hold up in extreme conditions.

The first recommendation is to thoroughly mix the product. Fluid Film® is thixotropic, and will get heavier upon sitting. Achieving room temperature with the product will help as well. If a thinner version is wanted, start by mixing a small amount of lightweight motor oil to the product until the desired consistency is reached.

No. Fluid Film® is a lanolin based product containing no solvents. It will not evaporate or dry from the surface. Fluid Film® will leave a wet, non-drying film, that will provide long term corrosion protection on all metals and superior lubrication for all moving parts.

Wet grass will stick to almost any surface. Applying Fluid Film® will prevent any corrosion from occurring and ease in removal of grass build up.

Fluid Film® will protect all metals from oxidation and atmospheric corrosion, including steel, copper, lead, tin and zinc. It will stop chrome and brass from pitting and aluminum and magnesium from oxidizing.

No. Fluid Film® needs to be sprayed at 60-80 psi. For larger applications, standard airless paint spraying equipment is required.

Where most products contain between seventy and ninety percent solvent, Fluid Film® contains none except for its propellant, meaning long lasting lubrication and protection. With no solvent, Fluid Film® won't evaporate or become sticky or gummy, allowing it to migrate to other areas for lubrication or protection. With its unique lanolin base, Fluid Film® will actually embed itself in the pores of metal, resisting wash off and keeping moisture and oxygen from getting to the base metal. Containing no solvent content, Fluid Film® lends itself to numerous applications where the comparative solvent-based products would not even be considered.

The bulk flash point of Fluid Film® NAS is 405 F.

No. Fluid Film® will not burn greenery.

The Shelf life of Fluid Film® is indefinite. In its aerosol form, Fluid Film® is guaranteed for one year from the date of purchase.

Yes. The Department of the Navy conducted testing on maintenance products for Navy vessels and Fluid Film® was found to provide superior performance. In fact, according to the Naval Surface Warfare Center, Carderock Division, Philadelphia, PA where material testing took place, the difference in performance...profound...most telling result of all the testing accomplished for this project." The Naval Ammunition Depot in Pensacola Florida conducted tests to find safer products for corrosion preventatives, and Fluid Film® was found to supply superior protection in salt water environments. Furthermore, the test results found "outstanding results" in direct exposure to the outside environment, and concluded with these findings: "The results of the tests preformed indicate a superiority in Fluid Film® for long term corrosion protection. The properties of Fluid Film® help to achieve a more environmentally safe work place." Testing was also done in an outside testing facility according to Salt Spray resistance - ASTM B117 standards where Fluid Film® was tested against WD-40, CRC 3-36, Corrosion X and LPS-3. After 3 weeks exposure Fluid Film® had a total surface corrosion of 1%, while the closest competitor contained 40% surface corrosion. Two of the other competitors had achieved 100% surface corrosion during this same period, proving once again the superior quality of Fluid Film®.

Text Us